384 LED USB Plant Grow Light with Dimmer and Daily Timer

Add supplemental light to an indoor plant shelf, cabinet or seedling bench with four slim LED bars. The bars share one inline controller, so you can adjust brightness and set a daily lighting routine for the whole set in one place.

Setup and controls

• Set a daily routine. Choose 3, 9 or 12 hours of light. The timer repeats the on/off cycle each day while the controller stays powered.
• Adjust all four bars together. Use the brightness button to choose 25%, 50%, 75% or 100%. The controller also has a dedicated on/off button.
• Check your USB power source. Use your own regulated 5 V USB-A supply. The supplier rating of 12 W at 5 V corresponds to 2.4 A, so check that a single port can supply that current.
• Plan the cable route before mounting. The four bars are wired together. Use the size diagram to check cable reach and choose suitable fixings for your mounting surface.

Specifications

• LEDs: 384 total, 96 per bar
• LED mix per bar: 8 white, 20 red and 68 warm white
• Bar size: approximately 26 × 5 cm each
• Net weight: approximately 244 g for the set
• Board material: aluminium PCB
• Power: 5 V DC via USB-A, rated 12 W

In the box

One wired four-bar LED grow light set with an inline controller and attached USB-A lead.