15m Active USB 2.0 Extension Cable – USB-A Male to Female

Extend a USB 2.0 data connection over 15 metres with active signal boosting.

This USB-A male-to-female extension cable has built-in repeater electronics to help maintain signal integrity over a long cable run. It is suitable for compatible printers, scanners, webcams, flash drives and other USB 2.0 data devices.

Features

• 15 metre USB-A male to USB-A female extension cable
• Built-in active signal booster/repeater for long-distance data transmission
• USB 2.0 data rates up to 480 Mbps, subject to the connected equipment and installation
• Compatible with Windows, macOS, Linux and supported Android USB hosts
• Plug-and-play with compatible USB devices

Important power information

Designed mainly for data transfer, not charging. USB power available at the far end may be insufficient for high-draw or bus-powered devices over 15 metres. If a device is not detected, disconnects or behaves unreliably, use an externally powered peripheral or a powered USB hub at the device end.

How to use

1. Connect the male USB-A plug to your computer or USB host.
2. Connect the peripheral to the female USB-A socket.
3. Allow the operating system a few seconds to detect the device.

For Android equipment, the host must support USB host/OTG operation and may require a suitable adapter. Avoid adding unpowered hubs or extra passive extension cables to the 15 metre run.

Need help choosing the right cable? Read our USB extension cable guide.

Technical Specifications:

Length: 15 metres
Product type: Active USB 2.0 extension/repeater cable
Connectors: USB-A Male to USB-A Female
Host connector: USB-A Male
Device connector: USB-A Female
USB compatibility: USB 2.0 and USB 1.1
Maximum data rate: Up to 480 Mbps
Signal amplification: Built-in active repeater chipset
Power source: Bus-powered from the host USB port
Downstream power output: 5.0 V ±5%, 125 mA maximum, 0.625 W
External power input: None
Driver requirements: None; plug-and-play
Indicators: Power and USB connection LEDs
Compatible operating systems: All USB-supported operating systems, including Windows, macOS, Linux and compatible Android USB host/OTG devices.
Compatible peripherals: Printers, scanners, webcams, flash drives and other compatible USB data devices
Construction: Plastic repeater housing with tinned anaerobic-copper conductors
Colour: Translucent smoke grey/bronze with black fittings
Weight: Approximately 0.38 kg
Operating temperature: 0°C to 40°C
Storage temperature: -20°C to 60°C
Operating humidity: 0–96%, non-condensing
Compliance: CE, FCC and RoHS
Techexpress product code: 15M-TRN-ACT-USB2-STD-A-MF-EXT-CBL-NZ
Sold as: Each
Packaging: Bulk

Compatibility note: Performance depends on the USB host, peripheral power requirements, drivers and the complete connection setup. Our 14-day trial-and-return service lets you test compatibility with your equipment; refund excludes shipping fees and is subject to our returns conditions. This cable is intended primarily for data extension and can supply a maximum of 125 mA at the device end, not the standard 500 mA available directly from many USB 2.0 host ports. High-power or bus-powered equipment may require its own power supply or a powered USB hub at the remote end. It is not intended for charging.

Package includes: 1 × 15m active USB 2.0 extension cable with built-in amplifier.

Warranty & returns

• 14-day change-of-mind return in unused condition; refund excludes shipping fees.
• 1-year return-to-base refund or replacement guarantee.

We welcome and answer all questions. Can’t find what you need? Contact us and we’ll help you find the right product.