SY4041-24vdc-panel-mount-relayImageMain-515_SI48GW7VCXDB.jpg
Move your mouse over image or click to enlarge

24VDC Panel Mount Relay

PRODUCT CODE: TXWS2315
  • $33.90

Ask a Question

All feature rugged construction and quick connect terminals for easy installation.DPDT PANEL MOUNT RELAYSTwo models available. One with a nominal 240VAC coil and one with 24VDC coil.Contact Form: DPDTContact Rating: 30A24V Model Coil Resistance: 350 Ohm240V Model Coil Resistance: 3800 ohm @ 50Hz
























Handy
Tip
Converting to a latching relay





Sometimes you want to energise a relay to stay on instead of only momentarily staying on. For example you may want to make an electric motor, or a solenoid to stay on for some time. You can do this with the circuit shown.The key to this is a momentary push button switch (there are many in this catalogue.)Pressing the push button switch (S1) activates the relay and closes the N O (Normally Open) and COM(Common) contacts. These contacts form a parallel connection across S1. Even if S1 is now opened, the relay will stay ON, or latched.To turn the relay off, you must interrupt power to the coil, in other words, switch V+ off, even momentarily. Even if you switch V+ on again, the relay will remain off, until you push S1 again.Note: While the relay is energized, it will continue to draw coil current. True mechanical latching relays do not do this.

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question