220nF 50VDC Monolithic Capacitor - techexpress nz
Move your mouse over image or click to enlarge
220nF 50VDC Monolithic Capacitor - techexpress nz 220nF 50VDC Monolithic Capacitor - techexpress nz

220nF 50VDC Monolithic Capacitor

PRODUCT CODE: TXWS2171
  • $0.48

Ask a Question

A monolithic ceramic capacitor consists of thin dielectric layers interleaved with staggered metal-film electrodes; after leads are connected to alternate projecting ends of the electrodes, the assembly is compressed and sintered to form a solid monolithic block. Monolithic capacitors are generally used as their compact dimensions are desired for high density applications with limited space.
























Handy
Tip
Capactitor Types





Ceramic:These offer low cost and high capacitance in a small physical size. Normally there are two types, the ‘High Stability Temperature Compensating’ type and the ‘Bypass and Coupling’ type. The former for use in resonant circuit and filter applications, with a value largely independent of voltage and frequency. The latter is for use in less critical applications, as they are less stable and have non-linear temperature characteristics and are somewhat voltage dependent.Polyester:These type offer good stability, a large range of values at low cost, and are the most widely used capacitor for general purpose.Polycarbonate:These have a low temperature coefficient, low dielectric loss at high frequency and excellent temperature stability characteristics.Polystyrene:These offer tight tolerance and are highly stable; making them suitable for very stable tuned circuits and oscillators.Polypropylene:This type has a very low dielectric loss and are particularly suitable in audio circuits and sample-and-hold circuits.Mylar:This is the Du Pont tradename for polyester. They usually have an aluminium film deposit on the dielectric and are called metallised polyester.

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question