SB2215-12-8v-100ah-lithium-deep-cycle-batteryImageMain-515_SI4BP45BGIEK.jpg
Move your mouse over image or click to enlarge
SB2215-12-8v-100ah-lithium-deep-cycle-batteryImageMain-515_SI4BP45BGIEK.jpg SB2215-12-8v-100ah-lithium-deep-cycle-batterygallery1-300_SI4BP4Q2T2DZ.jpg SB2215-12-8v-100ah-lithium-deep-cycle-batterygallery8-300_SI4BP55COTZW.jpg

12.8V 100Ah Lithium Deep Cycle Battery

PRODUCT CODE: TXWS3764
  • $899.00

Ask a Question

3 Year WarrantyHazardous MaterialsThe next generation of power storage is here! These LiFePO4 batteries weigh less than half of their Lead Acid counterparts. They may look fairly similar to lead acid batteries, but internally they’re a totally different, next generation concept. They’re actually made up of regular prismatit LiFePO4 cells, which are in mass production for many portable devices. An internal battery management system (BMS) ensures all cells are uniformly charged and discharged, as well as providing short circuit, over current, and reverse polarity protection. This provides you with a higher degree of protection than a traditional lead acid battery which is unprotected, and can discharge rapidly under short circuit conditions, causing fire and damage. The internal BMS will also limit discharge and manage cut-off voltage, to further protect the internal cells. This 100Ah model can provide continuous current up to 50A, with peaks of up to 100A. It’s not suitable for a primary vehicle starting battery, however is absolutely perfect for house batteries, backup batteries, and virtually any other application where you would typically use a large lead acid / AGM battery. Features:- Much lighter than Lead Acid and AGM Batteries- Robust LiFePO4 Cells- Excellent life spanSpecifications:Service Life: 10yrs+Cycle Life: 1500+ cycles (> 80% capacity retention)Nominal Voltage: 12.8VCut-Off Voltage: 10V approx.Charge Type: Constant Current / Constant VoltageDischarge Current 50AMax Continuous Current ≤100A (5 sec)Internal Cells: Prismatic LiFePO4 Maximum Internal Resistance:  35M?Output Terminals: M8 Bolt DownOperating Temperature: 0-45°C (60°C max discharging)Operating Humidity: RH < 85%Storage Temperature: 0-40°C (15-25°C recommended)Storage Humidity: RH < 50%



 




















Handy
Tip
Notes on Charging





While the internal battery management system will take care of most charging, in order to maintain optimum operation and capacity, were commend using a charger which is designed for LiFePO4 charging. These chargers are developed to work in the optimum method for recharging, providing longer service life.If you’re installing them as a house battery, then a DC-DC charger between your main battery system and the house batteries is also recommended, such as the MB3683Dual Input Multi-Stage.If you’re charging from mains power, we recommend the following chargers (see page 284 for individual details)• MB3611 4-Stage Multi-Voltage• MB3613 9-Stage Multi-Voltage• MB3621 Multi-Stage ChargerIf you are installing them off grid we recommend upgrading your charge controller to MP3741.

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question